Volume 37 -
jdm 2024, 37 - : 0-0 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Saadat M, Moradian M, Akbari Z, Ghodati P. The effect of curcumin photosensitizer on bond strength of a universal adhesive to the caries-affected dentin. jdm 2024; 37 : 14
URL: http://jdm.tums.ac.ir/article-1-6291-en.html
URL: http://jdm.tums.ac.ir/article-1-6291-en.html
1- Assistant Professor, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran; Member of Oral and Dental Disease Research Center, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
2- Student Research Committee, Shiraz University of Medical Sciences, Shiraz, Iran
3- Assistant Professor, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
2- Student Research Committee, Shiraz University of Medical Sciences, Shiraz, Iran
3- Assistant Professor, Department of Operative Dentistry, School of Dentistry, Shiraz University of Medical Sciences, Shiraz, Iran
Abstract: (70 Views)
Background and Aims: The bond strength of direct composite restoration to the caries affected dentin is a challenging issue. Preparation of dentin with an antibacterial agent is a method for creating durable bonded restorations. The aim of this study was to investigate the effect of curcumin photosensitizer on the bond strength of a universal adhesive to the caries-affected dentin (CAD).
Materials and Methods: In this experimental in vitro study, forty-four decayed human molar teeth were selected. After removing the surface enamel and dentin by a water-cooled saw, the decayed mid-coronal dentin was stained with a caries detection solution. The green and soft infected dentin was removed and CAD and hard and healthy surrounding dentin were left. Then, the remaining dentin surfaces were treated by 600 grit silicon carbide papers and polished. The specimens were divided into two groups (n=22): dentin pretreatment group by curcumin and control with no dentin pretreatment group by curcumin. Each group was divided into two subgroups based on the method of application of All-Bond Universal adhesive (Bisco, USA) (etch and rinseand self-etching methods). After placing the Aelite All Purpose Body (Bisco, USA) composite, all specimens were placed in a universal testing machine for microshear bond strength (µSBS) test. The failure mode of the isolated surfaces was evaluated under a stereomicroscope. Two-way ANOVA analysis was used for statistical analysis.
Results: Based on the obtained results, intervention with the adhesive application method and surface pretreatment with curcumin had no significant effect on the bond strength. Also, there was no significant difference in the bond strength of the curcumin group in both etch and rinse and self-etching methods (SE=56.3±27.11 MPa; ER=52.4±84.11 MPa) (P=0.847). In the curcumin-free group, there was no significant difference between the two different adhesive application methods (P=0.187).
Conclusion: The results obtained in the present study showed that the pretreatment of dentin affected by caries with light-sensitive curcumin and also use of a universal adhesive by either self-etching or self-etchinf methodshad no influence on the microshear bond strength of the composite restoration.
Materials and Methods: In this experimental in vitro study, forty-four decayed human molar teeth were selected. After removing the surface enamel and dentin by a water-cooled saw, the decayed mid-coronal dentin was stained with a caries detection solution. The green and soft infected dentin was removed and CAD and hard and healthy surrounding dentin were left. Then, the remaining dentin surfaces were treated by 600 grit silicon carbide papers and polished. The specimens were divided into two groups (n=22): dentin pretreatment group by curcumin and control with no dentin pretreatment group by curcumin. Each group was divided into two subgroups based on the method of application of All-Bond Universal adhesive (Bisco, USA) (etch and rinseand self-etching methods). After placing the Aelite All Purpose Body (Bisco, USA) composite, all specimens were placed in a universal testing machine for microshear bond strength (µSBS) test. The failure mode of the isolated surfaces was evaluated under a stereomicroscope. Two-way ANOVA analysis was used for statistical analysis.
Results: Based on the obtained results, intervention with the adhesive application method and surface pretreatment with curcumin had no significant effect on the bond strength. Also, there was no significant difference in the bond strength of the curcumin group in both etch and rinse and self-etching methods (SE=56.3±27.11 MPa; ER=52.4±84.11 MPa) (P=0.847). In the curcumin-free group, there was no significant difference between the two different adhesive application methods (P=0.187).
Conclusion: The results obtained in the present study showed that the pretreatment of dentin affected by caries with light-sensitive curcumin and also use of a universal adhesive by either self-etching or self-etchinf methodshad no influence on the microshear bond strength of the composite restoration.
Article number: 14
Type of Study: Research |
Subject:
operative dentistry
Received: 2024/07/12 | Accepted: 2024/08/17 | Published: 2024/03/29
Received: 2024/07/12 | Accepted: 2024/08/17 | Published: 2024/03/29
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
